33
Important
You can choose which carriers appear on this screen when you
configure your channel plan (see SELECT SCAN CHANNELS).
MOVING THE MARKER
You can view up to six carriers. A vertical marker appears over the
currently selected carrier. The channel number, type, and label for
the selected carrier appear in the upper right-hand portion of the
screen. The frequency and level of the selected carrier can be seen
directly beneath the graph. You can use the left or right arrows to
select the previous or next carrier.
ADJUSTING THE REFERENCE LEVEL
The current reference level setting is displayed above the graph.
This is the level at the very top line. You can adjust the reference
level using the up and down arrows. When you press the SHIFT +
keys, your microStealth sets the optimum reference level for
you.
ADJUSTING THE SCALE
The current scale setting is displayed above the graph. You can
adjust the scale to provide the best view of the carrier levels by
pressing the
soft key. A new set of soft keys appear. Use the
and
soft keys to increment and decrement the scale
value. Press the
soft key when you are finished.
CHECKING LIMITS
You can verify that the carrier levels are within limits. First you
need to tell microStealth which test point you are checking. This
determines which set of limits are used. Press the
soft key to
sequence through the available test points. The test point that you
have selected is represented in the upper portion of the screen by
one of the following icons:
