26
SELECTING CHANNEL PACKAGES
If you have configured channel packages, a list of available pack-
ages will appear. From this list, you can select the packages that
the subscriber has ordered. The number to the right of the package
name tells you how many channels are included in each package.
Use the up or down arrows to highlight a package and then press the
soft key to select it. A check mark appears in the left-hand
column of the list indicating that the package is selected. If the
highlighted package is already selected, pressing the
soft key
deselects it.
Tip
Select “ALL CHANNELS” if you want to include
all
the enabled
channels in the plan.
Press the
soft key or
when you have finished. Now your
microStealth will only evaluate the channels from the packages that
you have selected.
Tip
You can return to this screen at any time to change your package
selection by pressing the
soft key.
SELECTING THE TEST POINT
The next thing you should do is tell microStealth at which test
point you are located. This determines which set of limits are used.
Press the
soft key to sequence through the available test points.
The test point that you have selected is represented in the upper
portion of the screen by one of the following icons:
Subscriber Drop
Ground Block
Tap
User Defined
