Wavetek ANT-20, Operating Manual

Page: 73 / 126

ANT-20/ANT-20E Broadband Analyzer/Generator
Application Guide A-9
2.3.2 Selecting the Test Type: “ATM Test Control” VI
The “Test types” available for selection are used to structure the measurement and connection
types or so-called “Connection modes”. They are arranged according to protocol layers, with
only the ATM layer currently supported. Only those test types that are possible and meaningful
for the selected instrument configuration are available for selection.
To select and configure the test type required for your measurement task
✓
The instrument is configured for Emulate topology with switched virtual connections (SVCs).
✓
The “ATM Test Control” main window is open.
⇒
Click on this icon button or select the “Test - Setup...” menu command.
The “Test Setup” dialog window opens.
Fig. A-13 The “Test Setup” dialog
1. Select the desired test type from the “Test type” list box,
e.g. “ATM Layer QoS (SVC) - Calling”
2. Click the “Configure Test” button.
The “Test Setup <...>” dialog window opens (see Sec. 2.3.3).
– or –
Click the OK button if the pre-defined test type is to be used.
This returns you to the main window.
Fig. A-14 The “ATM Test Control” main window
1.
2.