Wavespan Stratum 100, Installation And Maintenance Manual, Page: 41 / 67

Stratum 100 Installation and Maintenance Guide Maintaining and Monitoring the Stratum 100
••
33
Remote Access through the Modem on the AUX Port
If you have connected an optional modem to the AUX port, you can access the Stratum 100
remotely by dialing in to the modem. Once the dial connection is established, you will see the
opening screen:
Stratum 100 Wireless Broadband Communication System
Software Version 00.01c
Copyright (c) 1996 - 1998
Access Level: [? ]
Password: [? ]
Entering the Password
When it is configured at the factory, the Stratum 100 is preset to have the following:
Access Level: superuser
Password: wavespan
After you enter these two fields, the Main Menu screen will appear as shown below.
---------------------------- Stratum 100 Main Menu ----------------------------
System Status: STBY - NOT CONNECTED - ALARM NEW [ Alarms & Events.. ]
System Date/Time: 1999-02-19,11:06:18.0
------- Local -------- ------ Remote -------
Device Name: DEFAULT ?
Device Location: DEFAULT ?
Link Description: DEFAULT ?
IDU Serial Number: 00000 ?
ODU Serial Number: ? ?
Ethernet Address: 00:60:c1:00:01:35 ?
IP Address: 192.168.10.134 ?
Alarms: DISABLED ?
------------------------------------------------------------------------------
[ System Admin.. ] [ Reports.. ] [ Utilities.. ] [ Diagnostics.. ]
[ Remote ] [ Remote Exit ] [ Logout ]
-------------------------------------------------------------------------------