
24
••
Installation
Stratum 100 Installation and Maintenance Guide
Step 6. Verifying Correct System Operation
To verify that the system is operating correctly, connect a PC system to the serial console port
of one of the IDUs and log in to the system as described starting on page 12.
Clearing Old Alarms and Events
While the system was being configured, a number of spurious alarms were generated. It will
be easier to see if the system is working correctly if those alarms are deleted. To do this, from
the Main Menu, use the down arrow to move to the
Alarms and Events..
item. Press Enter to
go to the Alarms menu.
------------------------------ Alarms & Event Log -----------------------------
System Status: OPERATE - NOT CONNECTED - ALARM
Time Stamp Description Type
------------------------------------------------------------------------------
1999-03-11,13:35:07.0 ODU Link Failure A
1999-03-11,13:35:03.0 Warm Start E
1999-03-11,08:32:43.0 System Diagnostic Ended E
1999-03-11,08:20:04.0 System Diagnostic Started E
1999-03-11,08:19:58.0 System Diagnostic Ended E
1999-03-11,08:19:16.0 System Diagnostic Started E
1999-03-11,08:19:13.0 System Diagnostic Ended E
1999-03-11,08:18:58.0 System Diagnostic Started E
1999-03-11,08:18:51.0 System Diagnostic Ended E
1999-03-11,08:18:39.0 System Diagnostic Started E
1999-03-11,08:18:37.0 System Diagnostic Ended E
1999-03-11,08:18:11.0 System Diagnostic Started E
1999-03-11,08:18:04.0 System Diagnostic Ended E
1999-03-11,08:17:47.0 System Diagnostic Started E
------------------------------------------------------------------------------
[ Clear All Alarms ] [ Clear All Events ] Mode: [WRAP WHEN FULL]
[ Page Up ] [ Page Down ] [ Home ] [ End ] [ ^Apply ] [ ^OK ] [ ^Cancel ]
-------------------------------------------------------------------------------
Use the down arrow to go to the
Clear All Alarms
item. Press Enter.
Use the down arrow to go to the
Clear All Events
item. Press Enter.
Use the down arrow to go to
OK
and press Enter to leave the screen.
Checking that Packets are Transmitting
From the Main Menu, use the down arrow to move to the
Reports..
selection. Press Enter to
display the Reports Menu.
Summary of Contents for Stratum 100
