waves system ID-AL My Video Player VP330 User Manual Download | Manualshive

Page: 8 / 66

background image

Safety instructions

VP330

8

Oct 2021

Version : 2.1 (for firmware 1.11 or higher)

is used in accordance witj its intended purpose. Nevertheless, for the sake of safety, we would like to
draw your attention to the following instructions:

• When using the device, comply with all local rules and regulations in force. Any modification or
conversion of the device automatically entails loss of the certification. The operation of a modified device
is liable to a penalty. In the interests of occupational safety, the operator and the user are held
responsible for complying with the regulations.

• Keep the original packing for a possible product reshipment. Also ensure that the packing material is
kept out of the reach of children. Only this original packing ensures optimal protection for the product
during transportation. If a product reshipment appears to be necessary during the guarantee period,

is not liable for any ensuing damages arising during the transportation and attributable to

Waves System
a defective packing.

• This device should be used only by persons whose training or knowledge ensures proper handling.

• Before each use, the operator must check that the device is in perfect working condition.

• This product must not be used in places where there is a potential explosion risk. Besides, it must
neither be used in an environment favoring combustion nor in a humid or excessively hot or cold location.

• Maximal temperature of use: +45°C

• Storage temperature: from 0°C up to +60°C

Safety instructions against risks due to electric currents

• The device must be connected to a grounded AC power outlet or a European standard outlet installed
as per good professional practices.

• Disconnecting means of primary supply: Power outlet is used as the disconnecting means of primary
supply, it shall remain accessible.

• Power supply: 12V DC - 3,45 A

• Before connecting the device, check that the mains voltage and frequency match the specifications
indicated on the mains adapter.

• Before powering, check that the device and cables are not damaged. Damaged cables and
connections must immediately be replaced.

• Never allow the power cords to come in contact with other cables. Handle the mains adapter cable as
well as all other cables connected to the mains with extreme care.

• Always connect the power cord to the device first, then to the mains. The power outlet must remain
accessible after the installation.

• Check the device and its mains adapter cable from time to time. Disconnect the device from the mains
when it is no longer used or for the purpose of maintenance.

• Handle the power cord by using only the plug. Never remove the plug by pulling the power cord.

• Electrical connections, repairs, and maintenance must be carried out by qualified personnel.

• Do not switch the device on or off within a short period of time as this reduces its lifespan.

«
...
6
7
8
9
10
...
»

Summary of Contents for ID-AL My Video Player VP330



































































Reviews:

No comments

Related manuals for ID-AL My Video Player VP330

LaCinema Mini HD Connect

Brand: LaCie Pages: 4

AZ7271 - Cd Personal

Brand: Magnavox Pages: 19

Brand: R volution Pages: 24

Brand: Technics Pages: 34

Brand: SanDisk Pages: 27

Brand: NAIM Pages: 28

Brand: Goodmans Pages: 10

Brand: August Pages: 2

Brand: CyberHome Pages: 52

Brand: Naxa Pages: 20

Brand: Monacor Pages: 25

Brand: Tesla Pages: 19

Brand: Hyundai Pages: 104

Brand: Denver Pages: 10

Brand: Memorex Pages: 46

Brand: LG Pages: 16

Brand: Data-Tronix Pages: 11

Brand: Kenwood Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands