waves system ID-AL My Video Player VP330 User Manual Download | Manualshive

Page: 7 / 66

background image

VP330

Safety instructions

Oct 2021

Version : 2.1 (for firmware 1.11 or higher)

7

1.

Safety instructions

CAUTION! DO NOT EXPOSE THE PRODUCT TO HUMIDITY NOR DUST!

Unplug the power supply cable before any servicing

FOR YOUR SAFETY, PLEASE READ CAREFULY THE USER'S GUIDE BEFORE OPERATING
YOUR PLAYER

.

VP330

CE marking

The CE marking is placed on the nameplate, at the rear side of the device. It attests to compliance of the
device with low voltage CE directive according to EN 55022 standard, and the Electromagnetic
Compatibility Directive 61000-4-x.

Overview

• The user manual is an integral part of the product. It must always be kept handy & close by. Proper
usage involves strict compliance with the instructions given in this manual.

In the event of return of the equipment, the user manual should be handed over to the new purchaser.

The staff should receive instructions concerning the proper usage of the device.

• Only the use of genuine parts ensures perfect safety for the user and correct operation of the device.
Moreover, only accessories mentioned in the technical documentation or explicitly approved by the
manufacturer must be used. If accessories or consumable products from other brands are used, the
manufacturer cannot stand guarantee for the correct and safe operation of the device.

• Damages caused through the use of accessories or consumable products from other brands will not
entail right to any benefit under the terms of warranty.

• The manufacturer will be liable for the safety, reliability and functioning of the product as long as the
assembly, settings, modifications, extensions and repairs have been carried out by the manufacturer or a
company approved by the manufacturer, and if the device is used in accordance with the instructions

mentioned in this manual.

• The player complies with the technical safety standards in force at the date of print of this manual. All
rights reserved for the electrical diagrams, procedures, names and devices mentioned herein.

• Any reproduction of the technical documentation, even partially, without the written authorization from

is prohibited.

Waves System

General safety instructions

This device has been shipped out from our facilities in perfect working condition. In order to preserve
these conditions, for safety and to avoid any risk of accidental bodily injury, the user must imperatively
follow the safety instructions and read the ‘Caution!' messages included in this manual.

This device, made by

, has been designed in a way that practically eliminates any risk if it

Waves System

is used in accordance witj its intended purpose. Nevertheless, for the sake of safety, we would like to

Warning



«
...
5
6
7
8
9
...
»

Summary of Contents for ID-AL My Video Player VP330



































































Reviews:

No comments

Related manuals for ID-AL My Video Player VP330

Brand: BARIX Pages: 2

Brand: Classe Audio Pages: 11

Brand: Teac Pages: 16

HQPOWER VDSCD6001

Brand: Velleman Pages: 41

Brand: SOUNDMASTER Pages: 13

Brand: Aquatic Pages: 32

Brand: Monacor Pages: 18

Brand: Arcam Pages: 60

Brand: Sencore Pages: 90

LinkTheater LT-H90LAN

Brand: Buffalo Pages: 59

Brand: GE Pages: 2

Brand: LENCO Pages: 1

Brand: LG Pages: 30

Brand: LG Pages: 29

Brand: LG Pages: 12

Brand: LG Pages: 16

Brand: LG Pages: 12

Brand: LG Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands