waves system ID-AL My Video Player VP330 User Manual Download

Page: 36 / 66

Control the player with folders and files

VP330

Oct 2021

Version : 2.1 (for firmware 1.11 or higher)

If the folder is looped with tag [RSSxxx], the message is sent at each loop of the folder.

001[J001][RSS099] : Plays folder 001 in loop. At each loop, message described in line 099 of file

will be sent through RS-232 output

serial.txt

Voir aussi...



RS-232 & TCP/IP communication protocol

[p.55]

8.2.18. Description of folder SYSTEM (optional)

This folder is optional. It contains additional files to customize the player or give it additional features.

SYSTEM\scheduler.tm2 -> File containing the scheduler

SYSTEM\scenario-config.json -> File to index web pages

Other files can be added depending of extensions and specific options of the player.

8.2.19. Description of folder WWW (optional)

The folder stores a set of web pages used to be displayed or to run Javascript code.

8.3. Arrangement of files inside folders

As for folder, the name of files give the behaviour of the playback

The naming of files is free if you want a random playback («(RND]» tag or no tag in the folder name).

In a sequential playback, files are played in an ascending order. To make sure of the order you canadd a
number at the beginning of the name. Additional tags acan be added to the filename to adapte the
scenario as for folders.

001 [J367] my message.mkv

063 [RS020] filename.wav

845 [V+12] my file.mp3

my song [NT].wav

For more information about the format of media files, you can refer the the detailed specification.









Summary of Contents for ID-AL My Video Player VP330



































































Search results

Summary of Contents for ID-AL My Video Player VP330

Reviews:

Related manuals for ID-AL My Video Player VP330

Brands by name

Popular brands

waves system ID-AL My Video Player VP330, User Manual

Search results

Summary of Contents for ID-AL My Video Player VP330

Reviews:

Related manuals for ID-AL My Video Player VP330

Brands by name

Popular brands