manualshive.com logo in svg

waves system ID-AL My Video Player VP330, User Manual

Share
Download
waves system ID-AL My Video Player VP330 User Manual Download Page 45

VP330

Control the player with a scheduler

Oct 2021

Version : 2.1 (for firmware 1.11 or higher)

45

Select this command to restart the playback of the folder where the player stopped previously. This 
command is ignored if there was no previous command of playback or if the player is in stop mode.

•STOP: Stop the playback

this command stops the playback in the current folder.

•STANDBY: Standby the player.

•WAKE UP: Wake up the player.

•HDMI-CEC STANDBY: Turn off a display device with the HDMI-CEC protocol.

•HDMI-CEC WAKE UP: Turn on a display device with the HDMI-CEC protocol.

•VIDEO PROJECTOR (PJLINK) POWER ON: Turn on a video projector with the PJLINK protocol.

•VIDEO PROJECTOR (PJLINK) POWER OFF: Turn off a video projector with the PJLINK protocol.

You can also configure the HDMI-CEC interaction mode of the player and its display device in menu 

. Thus the standby of a display device can automatically set the player in 

system settings

standby mode.

Refer to menu 

 to configure connection with a video projector using PJLink 

System settings

protocol.

Summary of Contents for ID-AL My Video Player VP330



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands