waves system ID-AL My Video Player VP330 User Manual Download | Manualshive

Page: 9 / 66

background image

VP330

Safety instructions

Oct 2021

Version : 2.1 (for firmware 1.11 or higher)

9

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN
EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO
THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”
WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDED TO ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE (SERVICING)
INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE
APPLIANCE.

Warning, the user's guide must be red each time the symbol is written.

Direct current

WEEE

User's guide must be red each time this symbol is written.

Positive electric polarity

Terms uf use

• This product has been designed for indoor use only.

• The device must be attached under 2m high from the ground.

• If this device has been exposed to very high temperature fluctuations (e.g.: after transportation), do not
connect it immediately. The condensation formed inside the device could damage it. Allow the device to
reach ambient temperature before connecting it.

• Do not shake the device. Avoid sudden movements during its installation or handling.

• When selecting the spot for installation of the player, ensure that it is not exposed to a high source of
heat, moisture, or dust. There

should not be any cables lying around as they might jeopardize your and others' safety.

«
...
7
8
9
10
11
...
»

Summary of Contents for ID-AL My Video Player VP330



































































Reviews:

No comments

Related manuals for ID-AL My Video Player VP330

Brand: Harman Kardon Pages: 20

Brand: T+A Pages: 82

Brand: Manta Pages: 36

Brand: Visual Circuits Pages: 75

Brand: Cyrus Pages: 23

Brand: Grundig Pages: 19

Brand: Magnavox Pages: 2

Brand: Mach Pages: 21

IB-mp301 Series

Brand: Icy Box Pages: 28

Brand: Chinavision Pages: 37

Brand: Emerson Pages: 22

Brand: LG Pages: 16

Brand: SONIQ Pages: 12

Brand: KWorld Pages: 25

Brand: RSQ Pages: 41

Brand: Sony Pages: 2

WALKMAN 3-261-583-81 (1)

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands