WaveRider NCL1170, User Manual

Page: 28 / 97

3 Installing the NCL1170
APCD–NC006–A 14
3.2 Initializing the NCL1170
As the unit powers-up, and the initialization sequence begins, progress messages are
displayed on the terminal screen. When initialization is complete, you will receive a message
indicating that the system is operational, followed by the
PASSWORD:
prompt. The factory
default password for the NCL1170 is a <blank field>, although WaveRider recommends that
you assign an unique password to each NCL1170 in your network.
If the NCL1170 default password <blank field> is acceptable, Enter. Otherwise,
To change the password of your NCL1170, follow the instructions in Changing the
NCL1170 Password , on page 15.
To specify a system name for your NCL1170, follow the instructions in Setting the
NCL1170 System Name , on page 16.
To reload the default settings of an NCL1170 already configured for use elsewhere
in your network, follow the instructions is
Resetting an NCL1170 to Factory Defaults ,
on page 16. If the NCL1170 is a factory-configured unit, you can omit this step.
For each of these procedures, you must be connected to the NCL1170 and logged
into the device.