WaveRider NCL1170, User Manual

Page: 79 / 97

APCD–NC006–A 65
sy stem pr otocol interface
Displays the protocol configuration for the specific
interface that you name.
interface
is either Ethernet
or Radio.
sy
stem
u
ptime
Displays how long the system has been running. If the
uptime is more than 24 hours, the time appears as n
days, hh:mm:ss where n is the number of days and
hh:mm:ss is the hours:minutes:seconds.
sy stem v ersion
Displays the build date and time, and lists all software
libraries and their version numbers.
t est r adio
Performs self tests and displays the results for all the
radio device. If you use this command, the link service is
disrupted for the duration of the test.
re boot| re start| re load| re set
Resets the NCL1170.
w rite| sa ve
Saves the current configuration. If you want to save the
new configuration, you must write (save) any
configuration changes before you reboot the NCL1170;
otherwise, the NCL1170 reverts to the previously saved
configuration.
w rite d efault| e rase
Removes all configuration changes, even if you saved
them, and resets the NCL1170 to the factory default
configuration.
help
[ command ]
Displays a list of all commands. If you type a command
name after help, the syntax for that command is
displayed. For example, type
help ip
to display all IP
commands and the syntax for each.
e xit| q uit| by e
Closes the console session.
Command Syntax Description