WaveRider NCL1170, User Manual

Page: 37 / 97

4 Configuring the NCL1170
APCD–NC006–A 23
1. At the
NCL1170>
prompt, type
<snmp>
to display the current SNMP settings for the
NCL1170.
2. To add a new community, type
<snmp community add community
READ|WRITE>
where
community
is the name of the community and
READ|WRITE
is the community type. You can have a maximum of five communities.
3. If a community is not set up the way you want it, delete it by typing
<snmp community del community READ|WRITE>
where
community
is the
name of the community and
READ|WRITE
is the community type.
4. At the
NCL1170>
prompt, type
<snmp location location >
to change the
geographical location of the NCL1170.
5. Type
<snmp contact contact >
to change the contact name for the NCL1170. The
contact can be a name and phone number, a URL, or an email address.
6. To add a trap server to the NCL1170 configuration, type
<snmp trap add
aaa.bbb.ccc.ddd community>
where
aaa.bbb.ccc.ddd
is the IP address of
the trap server and
community
is the name of the community on the trap server.
7. To delete a trap server from the NCL1170 configuration, type
<snmp trap del
aaa.bbb.ccc.ddd community>
where
aaa.bbb.ccc.ddd
is the IP address of
the trap server and
community
is the name of the community on the trap server.
8. At the
NCL1170>
prompt, type
<save>
to transfer the settings to memory.
4.3.4 Setting the DNS Resolver Configuration
The NCL1170 implements Domain Name Server/Service (DNS) resolver software. Once
configured, you can use host names instead of IP addresses when you make a Telnet
connection from the NCL1170 console to other IP hosts on the network, or when you issue
ping or traceroute commands to test connectivity.
Adding DNS lists is optional on the NCL1170, but you can configure the NCL1170 to use a
maximum of five DNS servers. An NCL1170 is factory-configured with no DNS servers listed.
You can also configure the NCL1170 to include a domain name for your local IP network.
The following procedure describes how to configure the NCL1170 to implement DNS resolver
software and configure the NCL1170 domain name. Setting the DNS resolver configuration is
optional.
1. At the
NCL1170>
prompt, type
<ip dns>
to display the current DNS setup used by
the NCL1170.
2. To add a DNS Server, type
<ip dns server add aaa.bbb.ccc.ddd >
where
aaa.bbb.ccc.ddd
is the IP address of the DNS Server.
3. To delete a DNS Server, type
<ip dns server del aaa.bbb.ccc.ddd >
where
aaa.bbb.ccc.ddd
is the IP address of the DNS Server.
4. To set the domain name for your local IP network, type
<ip dns domain
domain_name >
where
domain_name
is the name for your local IP network.
5. At the
NCL1170>
prompt, type
<save>
to transfer the settings to memory.