WaveRider NCL1170, User Manual

Page: 69 / 97

7 Troubleshooting
APCD–NC006–A 55
7.1 Verifying NCL1170 Routing
To verify the routing is correct, you will need to verify both the Master and Station Routing
Tables. If the Routing Tables are incorrect, configure the devices with the corrected values.
7.1.1 Verify the NCL1170 Routing Table
Use the Configuration Data Record for the NCL1170 to verify the information is configured
correctly in the device.
1. Connect to the NCL1170 using a crossover serial cable.
2. Log in to the NCL1170. You will be prompted for the NCL1170 password when you log
in.
3. Type
<mode>
to verify bridging or routing is set correctly for the NCL1170 group.
4. At the
NCL1170>
prompt, type
<ip>
. The configuration information is displayed.
5. Verify the NCL1170 Ethernet IP address and subnet mask are configured correctly.
6. Verify the radio IP address is correct, if applicable.
7. Verify the Routing Table is correct according to your routing plan.
8. If the forwarding mode is routing, at a Station NCL1170, ensure that the default static
route is set. At a Master NCL1170, ensure the Ethernet subnet for each Station is set.