WaveRider NCL1170, User Manual

Page: 41 / 97

4 Configuring the NCL1170
APCD–NC006–A 27
4.4.2 Point-to-Multipoint Routing Network
Figure 11 shows a configuration of a typical point-to-multipoint routing network.
Figure 11 Example of Point-to-Multipoint Routing Network
The following example session shows how to configure the Master NCL1170 for the routing
network shown in
Figure 11 .
NCL1170>
NCL1170> ip address ethernet 14.0.2.44 16
IP addresses:
Ethernet: 14.0.2.44/16
NCL1170> mode routing
Forwarding mode: IP Routing
NCL1170> dhcp
DHCP Disabled
NCL1170> dhcp mode relay
DHCP Relay Enabled
NCL1170> dhcp relay add 10.0.1.44
DHCP Servers/Relay Agents:
10.0.1.44
NCL1170> radio channel 1
NCL1170> radio type master
Radio type changed to: Master
NCL1170> radio unitid 1001
Unit ID changed to: 1001
NCL1170> radio station add 101
Ethernet
NCL1170
C
Ethernet
NCL1170
B
Ethernet
NCL1170
D
Ethernet
Radio
NCL1170
A
Type: Station
Unit ID: 103
Radio Channel: 1
Mode: Routing
IP Address - Ethernet: 13.0.2.103
- Radio: 10.0.2.103
Master ID: 1001
Type: Station
Unit ID: 102
Radio Channel: 1
Mode: Routing
IP Address - Ethernet: 12.0.2.102
- Radio: 10.0.2.102
Master ID: 1001
Type: Station
Unit ID: 101
Radio Channel: 1
Mode: Routing
IP Address - Ethernet: 11.0.2.101
- Radio: 10.0.2.101
Master ID: 1001
Type: Master
Unit ID: 1001
Radio Channel: 1
Mode: Routing
IP Address - Ethernet: 14.0.2.44
- Radio: 10.0.2.44
Remote Station List: 101
102
103
Sets the mode to routing
DHCP Relay is disabled by
default
Enable DHCP Relay
Add a DHCP Server to the
DHCP Relay table