![background image](http://html1.mh-extra.com/html/watts/premier-wp4v-50/premier-wp4v-50_installation-operation-and-maintenance-manual_3910972008.webp)
Page 8
Helpful Installation Tips for the Watts Top Mount Faucet
During shipping/handling the tog-
gle bolt on your new faucet may
push up out of position. Prior to the
install, hold the faucet as shown in
the picture and pull down on the
wing nut. This will ensure that the
O-rings are in their proper position
and that your faucet will have a
good seal.
Disassembling your faucet is never
recommended as this could void
your warranty. If it is necessary to
remove the fitting at the end of the
toggle bolt you must follow the fol-
lowing procedure for re-assembly.
Prior to re-connecting the fitting
to the toggle bolt, you must insert
the 3/8” blue tube into the fitting.
There are small O-rings inside of
the fitting that could be pushed out
of position if the blue tube is not
fully inserted first. Failure to do so
may cause the faucet to leak.