![background image](http://html1.mh-extra.com/html/gctek/alphaone/alphaone_instructions_3891490001.webp)
Alpha
ONE
Instruc
tions
Congratulations
on your new
AlphaONE
Filter
You have made a wise choice in choosing the AlphaONE filter. Your filter was
carefully thought out and designed to give you many years of faithful, worry free ser-
vice. Some of the care and planning of your filter is self evident in even the small things,
such as the Lifetime Warranty on the tank itself. The tanks are made of the ultimate filter
vessel material, fiberglass. This is a higher quality tank than the typical plastic tank
used on many filters.
Your clear spring check valve for the AlphaONE bead Agitator is designed so
in time (normally many, many years) when the check valve goes out you can simply
unscrew the union and replace just the valve seat itself in just a few minutes.
Your Multiport valve was carefully chosen to be the least restrictive backwash
valve on the market to give maximum flows for the least energy dollars. The internals
were carefully designed with maximum flows in mind to give further energy savings, by
allowing you to use the most energy efficient pumps on the market.
The AlphaONE Life Support System allows you to hook up a koi pond air
pump to the supplied fitting on the front of the multiport valve and supply life giving
oxygen to the filter bacteria during times of medical bypass or pump failure.
The AlphaONE Bead Agitator is a high quality air blower that injects huge
amounts of air into the vessel prior to backwash, this breaks up the bead pack which
allows for a very thorough backwash.
Rest assured that quality was the main consideration
when your
AlphaONE
filter was designed and assembled.
Getting to know your
AlphaONE
filter
Taking a few minutes to get to know the
different components of your
AlphaONE will assure that you are using
it to it’s maximum potential.
Assembly of your
AlphaONE
AlphaONE
Spring check valve
AlphaONE
Tank
5. Open Tank enclo-
sure. Unscrew the
black Omni-
fuser at the
top inside of
the tank.
Cover
exposed
pipe with
rag or tape.
Pour MEDIA
into filter.
Reattach
Omnifuser.
Replace
Tank enclo-
sure cap
and tighten
black ring.
If you have any questions on your filter feel free
to give us a call and we’ll be glad to help.
AlphaONE
Multiport Valve
AlphaONE
Pressure gauge
AlphaONE
“ALISS”
AlphaONE
Life Support
System
AlphaONE
Water drain
AlphaONE
Tank enclosure
opening
AlphaONE
Air release valve
AlphaONE
Media Agitator
AlphaONE
Agitator Slide valve
AlphaONE
Sight Glass
2. Hand tighten
Multiport valve to
the tank. It just slips
into position and
hand tightens with
no solvent gluing.
NOTE: top fitting is
hidden in this pic-
ture.
3. Thread the
“ALISS” into place
on the front of the
Multiport valve
(Use thread tape on
threads)
4. Set the MEDIA
AGITATOR in place
on top of the spring
check valve/Slide
valve. You may use
a
set screw
to attach
it to the pipe if
desired. Do not use
glue to attach.
6. Thread the
Pressure Gauge into
place.
(Use thread tape on
threads)
1. Tighten Water
Drain being careful
to not over tighten.