Watts HF scientific 28052, Owner'S And User'S Manual, Page: 39 / 67

Catalog No. 29290 32
Rev 3 06/2020
•
Press the

button to move to the next menu until CLN is displayed.
•
Select On or OFF using the

and

buttons.
•
Press the

button to accept I the setting and move to the next menu or
the  button to exit and return to AUTO .
4.2.12 Modbus Parity & Modbus Stop Bits - RS485 Parameters
•
These two menus will be used to set the balance of the RS-485
parameters.
• The default is no Parity (nOnE), 1 Stop Bit.
Modbus Parity – Setting the Modbus Parity
: Enter the
CONFIG
mode
by pressing the

and

buttons until the arrow beside CONFIG is
illuminated, then press the

button.
•
Press the

button to move to the next menu until PRTY is displayed.
•
Make selections using the

and

buttons
•
Press the

button to accept it and move to the setting STOP.
Modbus Stop Bits – Setting the Modbus Stop Bits : Enter the CONFIG
mode by pressing the

and

buttons until the arrow beside
CONFIG
is
illuminated, then press the

button.
•
Press the

button to move to the next menu until STOP is displayed.
•
Make selections using the

and

buttons
• Press the

button to accept it and move to the next menu or the

button to exit and return to AUTO .
4.2.13 4mA and 20mA Adjustment
•
If the 4-20 mA setting is turned On , two menus will appear one for each 4
and 20mA adjustment.