Watts HF scientific 28052, Owner'S And User'S Manual, Page: 34 / 67

Catalog No. 29290 27
Rev 3 06/2020
•
Once the desired set point has been set, press the

button to
accept it and move to the next menu.
•
Alarm 1 Delay Times:
1. Delay On : The following display will appear to allow you to
select the number of seconds currently set for the “delay on”
time.
• The currently selected number of seconds will be shown. Select
the desired number of seconds for the “delay on” time for this
alarm using the

and

buttons. Once the desired delay time
has been set, press the

button to accept it and move to the
next menu.
2.
Delay Off
: Next, the following display will appear to select the
number of seconds currently set for the “delay off” time.
•
The currently selected number of seconds will be shown. Select
the desired delay off time for this alarm using the

and

buttons. Once the desired delay time has been set, press the

button to accept it and move to the next menu.
•
After the settings for Alarm 1 have been completed, prompts will
allow for the set-up of the information on Alarm 2.
4.2.4.2 Alarm 2 - Configuring Alarm 2
Repeat the procedure listed in section 4.2.10.1 to set up the
parameters for alarm 2.