Watts HF scientific 28052, Owner'S And User'S Manual, Page: 13 / 67

Catalog No. 29290 6
Rev 3 06/2020
3.0 Installation
The MTOL+ must be mounted and installed in a suitable location, plumbed to
the sample water source (section 3.34), and hard-wired to electrical power (section 3.4).
Installation MUST be performed by qualified technicians, including licensed electricians,
following all instructions, complying with all local, state, federal and other governmental
requirements, and with all building and construction codes and standards.
If you have any questions or are uncertain about proper site location, installation or
connection of the MTOL+, please contact customer service at HF scientific.
• Installation MUST be performed by qualified technicians, including licensed
electricians, following all instructions, complying with all local, state, federal and other
governmental requirements, and with all building and construction codes and standards.
• MTOL+ is electrically powered. ALWAYS take proper precautions to recognize,
evaluate, and control electrical hazards during installation, programming, use and
service/maintenance.
• Use ONLY with water free of corrosive chemicals or other hazardous substances.
• ALWAYS leak check plumbing connections following installation and on a regular
basis.
• MTOL+ MUST be installed in an area isolated from vibration, and not susceptible to
freezing or temperature extremes. Mount on any suitable vertical and flat surface that
can support the product’s weight.
• Keep installation and work area clean, well-lighted, free of clutter and distractions, and
accessible only by authorized personnel and workers.
• MTOL+ must be located in an accessible and well-lighted area for use, servicing,
repair or replacement by authorized personnel.