8
Mounting the bar-switchcontrol:
Adjusting the mounting feet
The unit described in this documentation
is equipped with mounting feet, which can
be mounted onto all actuators fitted with
an interface acc. to VDI/VDE 3845.
The dimensional width is achieved by ha-
ving the feet mounted either inwards or
outwards (Fig. 1 and 2), and the height
is adjusted by sliding the mounting feet
along the guides on the side of the housing
(Fig. 3).
Fig. 1: Feet mounted inwards:
Fixing dimensions 80 x 30 mm
Fig. 3: Height adjustment for different
pinion lengths 20, 30, 40 and 50 mm
Fig. 2: Feet mounted outwards:
Fixing dimensions 130 x 30 mm
