14
Setting the round initiators and Position Indicator:
Setting the round initiators
•
According to the General Instructions,
the appropriate actuating device for the
Open- i.e. Closed-Position in the basic
position of the automatic valve is to be
set, so that it generates a signal a few
degrees before reaching the end positi-
on.
•
Then set the other actuating device
slightly less than 90° to the first actua-
ting device (see picture this page).
• Take the valve to the other end position,
and set the actuating device, so it also
generates a signal a few degrees before
reaching the end position.
• The red marking is there to indicate the
open way for the valve. Simply bend
and tear of f the unused segment from
the red T-formed display clip.
