7
MOUNTING THE FAUCET
Air Gap Faucet (Optional)
1) Drill a 7/8” hole in the sink or the counter top, or use an
existing hole.
2) Slide chrome cover plate and rubber gasket on to
stem of faucet and place faucet onto sink, with the
stem going through the hole.
3) Place metal slotted washer over threaded
stem of faucet.
4) Place plastic spacer over
threaded stem of faucet
locking in place, slotted
washer onto countertop.
5) Tighten nut from under
the counter surface to lock the
faucet into place.
6) Attach red ¼’’ drain water discharge line to DRAIN
INPUT barb. And red 3/8’’ drain line to DRAIN
OUTPUT barb as shown.
7) Thread the faucet connector onto threaded stem of faucet. Do not use Teflon tape.
8) Connect blue 3/8” tubing to faucet connector.
Rubber gasket
Drain line to air gap
1/4” red tubing
Drain line from air gap
to drain clamp 3/8” red tubing
Darin Output
Darin Input
Chrome cover plate
Plastic spacer
Faucet connector
3/8” X 7/16”
Faucet nut
Metal washer
Slotted washer
Sink or counter top material
Blue 3/8” tubing
(Fig. 4 B)
MOUNTING THE FAUCET
Standard Faucet
1) Drill a ½” hole in the sink or the counter top, or use an
existing hole.
2) Slide chrome cover plate and rubber gasket
on to stem of faucet and place faucet onto
sink, with the stem going through the
hole.
3) Place metal slotted
washer over threaded
stem of faucet.
4) Tighten nut from under the counter surface to
lock the faucet into place.
5) Thread the faucet connector onto threaded
stem of faucet. Do not use Teflon tape.
6) Connect blue 3/8” tubing to faucet connector.
Rubber gasket
Chrome cover plate
Faucet connector
3/8” X 7/16”
Faucet nut
Metal toothed washer
Big metal washer
Sink or counter top material
Blue 3/8” tubing
(Fig. 4 A)
Summary of Contents for new millenium
Page 2: ...Distributed by Serial...
