Waters ACQUITY Overview And Maintenance Manual Download

Page: 14 / 136

C.2 Running Hexane and THF with the ACQUITY QDa Detector ...................................................... 74

C.3 QDa solvent compatibility (KAD) ..................................................................................................75

C.4 QDa solvent compatibility (KAB) ................................................................................................78

C.4.1 Items exposed to solvent ....................................................................................................79
C.4.2 Solvents used to prepare mobile phases ............................................................................80

D External connections...............................................................................................82

D.1 External wiring and vacuum connections .....................................................................................82

D.2 Connecting the Standard instrument’s backing pump .................................................................. 84

D.3 Connecting the Performance instrument’s backing pump ............................................................ 85

D.3.1 Making the electrical connections to the rotary backing pump............................................ 89

D.4 Connecting to the nitrogen gas supply .........................................................................................90

D.5 Connecting and disconnecting the external source exhaust valve assembly (KAB) .................... 91

D.5.1 Connecting the external source exhaust valve assembly (KAB)......................................... 91
D.5.2 Disconnecting the external source exhaust valve assembly............................................... 94

D.6 Connecting and disconnecting the internal source exhaust valve assembly (KAD)..................... 94

D.6.1 Connecting the internal source exhaust valve .................................................................... 94
D.6.2 Disconnecting the internal source exhaust valve ................................................................ 97

D.7 Source exhaust tubing .................................................................................................................97

D.7.1 Connecting the exhaust-trap bottle .....................................................................................97
D.7.2 Alternate configurations ....................................................................................................101
D.7.3 Connecting the 2.5-L waste container...............................................................................104

D.8 Connecting the nitrogen exhaust line .........................................................................................107

D.8.1 Connecting the exhaust solenoid cable ............................................................................108

D.9 Connecting the workstation ........................................................................................................109

D.9.1 Connecting to the workstation:..........................................................................................110
D.9.2 Connecting the instrument to the power source:............................................................... 110

D.10 Connecting Ethernet cables (systems with ACQUITY LC)....................................................... 110

D.11 Input/output signal connectors..................................................................................................111

D.11.1 Signal connections ..........................................................................................................112

June 15, 2017, 715003956 Rev. F

Page xiv

Summary of Contents for ACQUITY








































































































































Search results

Summary of Contents for ACQUITY

Reviews:

Related manuals for ACQUITY

Brands by name

Popular brands

Waters ACQUITY, Overview And Maintenance Manual

Search results

Summary of Contents for ACQUITY

Reviews:

Related manuals for ACQUITY

Brands by name

Popular brands