C.3 QDa solvent compatibility (KAD)
Note:
The solvent compatibility information in this section refers to the KAD version of the QDa
detector, shown in the following figure:
Figure C–1: QDa detector (KAD)
PTFE exhaust tubing
Exhaust trap bottle
Source exhaust tube elbow connector
Waste liquid drip port
C.3.1 Items exposed to solvent
The items that appear in the following table can be exposed to solvent. You must evaluate the
compatibility issues if the solvents used in your application differ from the solvents normally used
with these items.
See
Solvents used to prepare mobile phases
for details about the most common ingredients used
to prepare mobile phases.
June 15, 2017, 715003956 Rev. F
Page 75