D
External connections
This appendix describes the instrument’s external connections.
Warning:
To avoid spinal and muscular injury, do not attempt to lift a system module
without assistance.
Notice:
To avoid equipment damage caused by lifting, do not use the source drain
manifold to lift the instrument.
Notice:
To avoid damaging system modules, contact Waters Technical Service before
moving the modules. If you must transport a system component or remove it from
service, contact Waters Technical Service for recommended cleaning, flushing, and
packaging procedures.
D.1 External wiring and vacuum connections
When making connections to the QDa detector’s rear panel, refer to the figure "Rear panel
connections" in this topic.
June 15, 2017, 715003956 Rev. F
Page 82