Figure 3–115: Location of seal-wash tubing
Location of seal-wash tubing
Location of seal-wash tubing
3.20 Cleaning the exterior of the equipment
Warning:
To avoid electric shock,
• ensure that the electrical power to the equipment is interrupted;
• when cleaning the surface of the equipment, apply water to a cloth, and then wipe
the instrument or device. Do not spray or otherwise apply water directly onto any
equipment surface.
Warning:
To avoid personal injury, use eye and hand protection during the cleaning
process.
Requirement:
Use eye protection when performing this procedure.
Requirement:
Wear clean, chemical-resistant, powder-free gloves when performing
this procedure.
To clean the exterior of the equipment:
Clean surfaces of the equipment using only a clean, soft, lint-free paper or clean cloth dampened
with water.
August 8, 2016, 715005050 Rev. C
Page 125
