Warning:
To avoid electrical shock, observe these precautions:
• Use SVT-type power cord in the United States and HAR-type power cord, or better,
in Europe. For requirements elsewhere, contact your local Waters distributor.
• Inspect the power cord for damage, and replace it, if necessary.
• Power-off and unplug each module before performing any maintenance operation
on it.
• Connect each module to a common ground.
Warning:
To avoid spinal and muscular injury, do not attempt to lift a system module
without assistance.
See also:
For safety considerations regarding specific system modules, consult the appropriate
information on the user documentation CD.
FCC radiation emissions notice
Changes or modifications not expressly approved by the party responsible for compliance, could
void the user's authority to operate the equipment. This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Electrical power safety notice
Do not position the instrument so that it is difficult to disconnect the power cord.
Equipment misuse notice
If equipment is used in a manner not specified by its manufacturer, protections against personal
injury inherent in the equipment’s design can be rendered ineffective.
Safety advisories
Consult the "Safety advisories" appendix in this publication for a comprehensive list of warning
advisories and notices.
Operating this device
When operating this device, follow standard quality-control (QC) procedures and the guidelines
presented in this section.
August 8, 2016, 715005050 Rev. C
Page iv
