Figure 3–86: Location of outlet tubing
Transducer
Outlet tubing
4.
Using the 5/16-inch open-end wrench to hold the check-valve cartridge in place,
disconnect the tubing connection from the check valve using the 1/4-inch open-end
wrench.
Figure 3–87: Location of check valve tubing connection
Check valve
Place 5/16-inch open-end wrench here
Place 1/4-inch open-end wrench here
5.
Disconnect the pressure transducer cable from the bulkhead by squeezing the tabs and
pulling gently.
August 8, 2016, 715005050 Rev. C
Page 108
