74
|
107
Safety
Introduction
Product Overview
Installation
Operation
Troubleshooting
Maintenance
Installing the Balance Valve Hoses
5
4
2
3
1
Use the illustration and instructions to install the
balance valve hoses.
1 Install the fitting (1/4 MNPT x 1/4 AB) into a port
on the high-pressure side of the pump.
2 Connect the orange air brake hose to the
balance valve and a discharge port on the
pump.
Note:
Always connect to the first stage of a
multistage pump or the low-pressure
outlet of an HL Series pump.
3 Connect the yellow air brake hose to the
balance valve and auto-sync solenoid
assembly.
4 Connect the black air brake hose to the balance
valve and auto-sync solenoid assembly.
5 Connect the black air brake hose to the balance
valve and separator filter.
Summary of Contents for CAFS-CP-2 Series
Page 53: ...Notes...
