97
|
107
Safety
Introduction
Product Overview
Installation
Operation
Troubleshooting
Maintenance
Changing the Separator Filter
1
4
2
5
3
6
Use the illustrations and instructions to change the
separator filter. Space constraints may require you
to remove the oil filter tube before changing the
filter. Purge the pressure from the system before
changing the separator filter.
• Purge all pressure before
servicing.
• Liquid ejected at high
pressure can cause
serious injury.
High Pressure
Open the pressure relief valve to make sure
that you purge the pressure from the system
before beginning the procedure.
1 Remove the separator filter from the assembly.
2 Discard the filter.
3 Install the replacement filter onto the assembly.
4 If space constraints require you to remove the
oil filter tube before changing the filter, loosen
the compression fitting securing the oil filter
tube to the assembly.
5 Raise or remove the tube, then follow the
previous steps to install the replacement filter.
6 Lower the tube into the assembly, then tighten
the compression fitting to secure the tube.
Summary of Contents for CAFS-CP-2 Series
Page 53: ...Notes...
