background image

 

Revision 1.1 

 

Page 7 

WATERLOGIC MANUFACTURED WATER TREATMENT SYSTEM LIMITED WARRANTY  

UNITED STATES AND CANADA ONLY 

 

Waterlogic water treatment systems are guaranteed to the original purchaser to be free of defects 
in materials and workmanship for a period of three (3) years from the date of purchase, but in no 
event longer than forty-eight (48) months from the date of manufacture. Waterlogic Commercial 
Products, LLC (“Waterlogic”) based in the U.S.A. and its affiliated companies are not liable for any 
cost of removal, installation, transportation, or any other charges which may arise in connection 
with a warranty claim.  

 

This warranty does not cover damage or wear to products caused by abnormal operating 
conditions, accident, abuse, misuse, unauthorized or improper alteration or repair, damage caused 
by or resulting from shipping or accident, damage caused by hot water, freezing, flood, fire, or acts 
of God. The effects from chlorine corrosion, scaling and normal wear are specifically excluded from 
this warranty. This warranty does not cover products used outside the country where the unit was 
purchased, and does not cover products that were not installed in accordance with Waterlogic 
printed installation and operating instructions obtained in training or from www.waterlogic.us. 
Failure to follow all instructions for operation and maintenance voids the warranty. This warranty is 
not transferable.  

 

To obtain warranty repairs or replacement, you must obtain a Return Authorization from 
Waterlogic. To obtain a Return Authorization, you must submit a Return Authorization form with 
supporting documentation to Waterlogic for evaluation. The form is available at 
www.waterlogic.us. Supporting documentation must include, but is not limited to; proof of 
purchase, installation date, failure date, and supporting installation and maintenance data. After 
you submit a Return Authorization form and supporting documentation, Waterlogic will determine 
whether a reasonably apparent defect in materials or workmanship covered by this limited 
warranty exists. If Waterlogic determines the claimed defect is covered by this warranty, Waterlogic 
will, at its sole discretion, determine whether to correct the defect or replace the unit, free of 
charge to you. If Waterlogic determines that the unit should be returned for warranty service, 
Waterlogic will approve of return in writing and will issue a Return Authorization which you must 
obtain prior to shipping the product. You are responsible for the cost of freight in to Waterlogic.  

 

Waterlogic and its affiliated companies hereby limit the duration of any and all implied warranties 
to a maximum period of three (3) years from the date of purchase including, but not limited to, the 
implied warranties of merchantability and fitness for a particular purpose. Some states do not allow 
limitations on how long an implied warranty lasts, so the above limitation may not apply to you. 
Consequential and incidental damages are not recoverable under this warranty. Some states do not 
allow the exclusion or limitation of incidental or consequential damages, so the above limitation or 
exclusion may not apply to you

 

 

This warranty gives you specific legal rights and you may also have other rights which may vary 
from state to state.  
 

 

Waterlogic Commercial Products, LLC    

 

 

 

 

 

Tel: 

(800) 723-3426 

11710 Stonegate Circle 
Omaha, NE 68164  

 

 

 

 

 

 

 

 

 

 

 

Website: 

www.waterlogic.us

 

 

 

Summary of Contents for WL500 - Sparkling









































Reviews: