Revision 1.1
Page 40
CUP HOLDER (AK-0007) ASSEMBLY INSTRUCTIONS
Step 1
- Fasten support brackets to back-side of cup holder as shown. Requires 8 total
screws (provided in box).
Step 2
- Fasten the insert panel into the base cabinet. Note that this task will require a little
maneuvering of the insert panel for proper alignment. Take care not to break the plastic tabs
on the insert panel.
Step 3
- Fasten the cup holder assembly to the front door.
Waterlogic Cup Dispenser (AK-007)
Accept cups from 4 oz. to 14 oz.
Cup Opening Minimum Diameter is 2-1/2 in. or 64 mm
Cup Opening Maximum Diameter is 3-1/4 in. or 84 mm
