Revision 1.1
Page 15
PROGRAMING MENU
Menu
Options
Brief Description
Cold Temp
Set
3° - 12°C
The cold temperature can be set between 3°C and 12°C or 37°F and 54°F,
depending on which units are selected (°C or °F) in the F/C option.
37° - 54°F
Recommended/Default Setting is 5°C/41°F.
Hot Temp
Set
70°C - 95°C
The hot temperature can be set between 70°C and 95°C or 158°F and 203°F,
depending on which units are selected (°C or °F) in the F/C option.
158°F - 203°F
Recommended/Default Setting is 87°C/189°F.
Temp
Display
Static
The display indicates the STATIC (SET POINT) temperature.
Default
Ranging
The display indicates the ACTUAL tank temperature
UV Timer
3 minutes
The UV lamp lights every time you take a drink of cold water, and stays on for 3
minutes
.
Recommended/Default Setting is 3 minutes
10 minutes
The UV lamp lights every time you take a drink of cold water, and stays on for 10
minutes.
Constant
The UV lamp stays on when power is on.
Not Recommended
F/C
F
Temperatures are displayed in degrees Fahrenheit.
Default is
o
F
C
Temperatures are displayed in degrees Centigrade.
Language
English
The display will read in English.
Default is English
Spanish
The display will read in Spanish
French, Etc…
The display will read in French, and many others…
Flow
Counter
Liters
(4000-9000)
DO NOT USE
. “NO WATER SUPPY” Fault will occur. Use Filter Timer Instead.
Gallons (1000-
3000)
DO NOT USE
.
“NO WATER SUPPY” Fault will occur. Use Filter Timer Instead.
Filter Timer
3 months
Timer for Filter Life set at 3 months. Displays “Change Filter” after 3 months
6 months
Timer for Filter Life set at 6 months. Displays “Change Filter” after 6 months
9 months
Timer for Filter Life set at 9 months. Displays “Change Filter” after 9 months
None
Timer for Filter Life is turned off.
Default is None
Filter Life
00
DAYS
Indicates amount of water flowed(gal/liters) or days elapsed since last reset
Ensure Filter Timer is enabled and Filter Life indicates DAYS
Sleep Mode
On
Shuts heater down (hot water) if not used in 3 hours. –
Default Sleep is ON
Off
Hot water remains powered indefinitely.
Default Set
Cold
Defaults Display & Dispense Selection to Cold after 3 seconds.
Default is Cold
Sparkling
Defaults Display & Dispense Selection to Sparkling after 3 seconds.
Reset
OK?
Resets the Filter Life to zero. Confirm by selecting Button 3 (Hot) to Save and
Exit. This resets the timer.
