Revision 1.1
Page 16
PROGRAMMING INSTRUCTIONS
Access the programming menu by depressing Buttons No. 1 and No. 2 simultaneously for three
seconds until the Password Message appears on the display: Password * * * *
PASSWORD IS: 1 1 1 1
Press Button No. 1 until the number 1 is displayed
Press Button No. 2 to move to next field
Press Button No. 1 until the number 1 is displayed
Press Button No. 2 to move to next field and continue…until all 4 fields display 1 1 1 1
Press Button No. 3 to enter the password and access the programming mode.
Note: Unit will exit programming mode if no buttons are pressed within 5 seconds and return
to display mode.
Programming Example: Change Language
1.
Press Buttons No. 1 and No. 2 for three seconds until “
Password ****
” appears
on the display. Enter 1 1 1 1 Password as shown above.
2.
Press Button No. 2 repeatedly to scroll through the menu until the option
“
Language
” appears on the display.
3.
Press Button No. 3 to select the Language option.
4.
Press Button No. 2 repeatedly to scroll down through the languages until Spanish
is displayed).
5.
Press Button No. 3 to select “
Spanish
.” This saves the selection.
6.
Press Button No. 4 to exit programming mode.
Programming Example: Change Language and Lower Cold Temp
1.
Press Buttons No. 1 and No. 2 for three seconds until “
Password ****
” appears on
the display. Enter 1 1 1 1 Password as shown above.
2.
Press Button No. 2 repeatedly until the menu scrolls to the option “
Language
” on
the display.
3.
Press Button No. 3 to select the Language option.
4.
Press Button No. 1 repeatedly to scroll up through the language. (Spanish, French,
English, and others).
5.
Press Button No. 3 to select “
English
.”
6.
Press Button No. 1 repeatedly until the menu scrolls up to the option “
Cold Temp
Set
” on the display.
7.
Press Button No. 3 to select the “Cold Temp Set” option.
8.
Press Button No. 1 repeatedly until “
39F
” is displayed.
9.
Press Button No. 3 to select “
39F
.”
10.
Press Button No. 4 to exit Programming mode.
