20
5561304
2
1
S
S
S
S
5.1 POSITIONING THE APPLIANCE
Position the appliance in the point of installation, away from sources of heat and
direct sunlight.
The appliance is not suitable for outdoor use and it is also not recommended to
install it in very damp rooms.
- Adjust the feet in ground models (
1
) to make the structure level (fig.7).
- The appliance should be positioned in such a way as to leave approximately
10
cm
of space free
S
for air to circulate freely; the condenser side must be easily
accessible for cleaning.
- Optional drop collection trays are available for the TOP models upon request,
which can be fastened to the machine via an adjustable bracket.
- Special ventilation grills/slits must be prepared in the undercounter model’s housing
compartment to favour disposal of the heat produced by the refrigerating circuit
(fig.10).
We recommend creating 300x300 mm or of equivalent measure ventilation
grills.
- Make sure the water cooler is resting fully on all four supporting feet.
-
For safe and correct functioning the appliance must be placed flat
Installing the tray (optional)
• Place the machine upon its support surface (do not turn the machine over).
• Loosen the screws that secure the tray’s fastening bracket to the structure (fig.7.3).
• Move the bracket so that the internal distance from the tabs to the machine’s body
is the same as the thickness of the tray.
• Tighten the screws and push the tray in as shown (fig.7.5).
7
7.3
7.4
7.5
7.1
7.2
EN
5 INSTALLATION
Install the machine under the sink, keeping the vent com-
pletely clear. Do not put anything in the way that could pre-
vent or restrict the circulation of air.
Reserved to qualified operators - Forbeholdt faglærte operatører - Reserverad för kvalificerade operatörer - Reservert for kvalifiserte operatører - Только для
квалифицированных специалистов
Summary of Contents for NIAGARA IB
Page 7: ...7 5561304 RU 1 2 3 5 1 UV C...
Page 18: ...18 5561304...
