- 16 -
2. CINEMA SET-UP : 4 X SUB600S AMPLIFICATION WITH USE OF
DIGITAL LINKING BETWEEN 2 X RS700
Before commencing check that the 2 RS700 used are set to operate in the same mode (see setting the
mode and the main gain page 13). The digital input and output are exclusively for digital chaining
between RS700. Never connect other devices to them.
In this configuration a “PRIMARY” RS700 drives a “SECONDARY” RS700 by use of the proprietary S/PDIF
digital protocol. The power outputs of the “PRIMARY” RS700 and “SECONDARY” RS700" will be identical
and without any additional latency.
Reminder :
Connections are to be made with all electronics turned off.
• Connect the SUB PREOUT output of the AV processor to either the L or R RCA (16) or the
L or R XLR (17) input of the RS700. Either the L or R input can be used as the inputs in this mode
as they are automatically summed.
• Connect the DIGITAL SPDIF OUT (20) output of the “PRIMARY” RS700 to the DIGITAL S/PDIF
IN (19) input of the “SECONDARY” RS700 using a 75ohm RCA cable
• Connect amplifier (21) outputs to SUB600S
PRIMARY RS700
SECONDARY RS700
Summary of Contents for RS700
