Waterfall Audio RS700, Instructions Manual

Page: 11 / 34

- 8 -
KEY :
1. Input Level Adjustment Control (volume)
2. Programming interface (factory reserved)
3. Frequency controller - function depends on the selected operation mode
4. Mute selector
5. RCA/XLR input selector
6. Analog/Digital input selector
(in most cases this switch must be in the Analog "AN" position)
7. Phase selector
8. Bandwidth management selector – function dependant on the selected operation mode
9. Signal processing selector – function dependant on the selected operation mode
10. Ventilation grilles with cleanable dust filter
11. Main power switch
12. Aluminum faceplate / tamper protection
13. Red LEDS – U-GUARD™ power management and T-GUARD™ thermal protection indicator
14. Blue LEDS – power indicator
15. Green LEDS – X - GUARD™ excursion control processing indicator («SUB» mode only)
16. RCA unbalanced line-level input
17. Line-level XLR balanced inputs
18. Line-level XLR outputs
(for use with an external analog amplifier controlled by the DSP)
19. 75 Ohm RCA type S/PDIF digital input
(exclusively for use with a second RS700)
20. 75 Ohm RCA type SPDIF digital output
(exclusively for use with a second RS700)
21. Speaker outputs
22. 12Vdc trigger Input/output (3.5mm mono jack)
23. Trigger operation selector
24. AC outlet with integral fuse holder
Supplied accessories : 1 mains cord - 2 rack mount ad screws - 4 hemi-spherical feet