Docking the VISTA Body Camera in a VISTA Transfer Station
Docking the VISTA Body Camera in a VISTA Transfer Station
Note:
The VISTA Transfer Station must be set up and configured to be used with
your Evidence Library software. For instructions how to set up the Transfer
Station, see Appendix D: VISTA Transfer Station Setup on
When you dock the VISTA Body Camera in a Transfer Station connected to Evidence Library
software:
l
The camera's battery begins to charge, if needed
l
VISTA's time and date synchronize with the Evidence Library system, if needed (VISTA only)
Important!
VISTA (no Wi-Fi® and GPS) sets its internal date and time
from the Evidence Library software's computer. If the computer's date
and time is set incorrectly, VISTA's will be set incorrectly, and your video
evidence will be marked with the incorrect date and time.
l
The camera's firmware upgrades, if a
firmware upgrade has been staged on the
camera
l
The camera communicates to the Evidence
Library software that it has recorded events
to upload
l
Recorded events are uploaded to the
Evidence Library software
l
Evidence Library software sends commands
and/or requests to the camera as applicable:
o
Mark any imported recorded events as
import confirmed
The events confirmed as imported are
immediately unprotected. This makes
the storage space available to be reused
as needed.
o
Update the configuration
If the configuration is manually pushed
to the camera (through the Evidence Library
checkout process), the configuration is updated immediately.
If the configuration is automatically pushed
to the camera, the configuration is
updated after the camera is undocked.
o
Stage a firmware upgrade
The firmware upgrade is staged on the camera immediately, and then is applied the next
time the camera is docked.
When you undock the camera from the Transfer Station, it is ready for normal operation.
For more information about the Transfer Station, see
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518
33
