Wearing VISTA XLT
Wearing VISTA XLT
Each VISTA XLT uses two mounts: one for the DVR and one for the camera sensor.
These mounts are available for the DVR:
l
Belt clip (
)
l
Belt holster (
This mount is available for the head-mounted camera sensor:
l
Glasses mount (
)
The glasses mount has been designed to work with Oakley Flak Jacket® glasses.
These mounts are available for the body-mounted camera sensor:
l
Magnetic mount (
)
l
Shirt clip (
The DVR connects to the camera sensor using a cable. Various cables and strain-relief clips are
available.
Recommended mounting order for VISTA XLT system
To wear VISTA XLT:
1. Disconnect the cable from the VISTA XLT DVR and camera sensor.
2. Mount the DVR and attach it to your belt.
3. Mount the camera sensor and attach it to your glasses or clothing as appropriate.
4. Connect the camera sensor end of the cable to the camera sensor, then route the cable
through your clothing toward the DVR as appropriate.
Note:
The DVR end of the cable is marked with
DVR
.
5. Connect the
DVR
end of the cable to the DVR.
Wear the VISTA XLT DVR and camera sensor where they are most comfortable, convenient,
and secure for you. Make sure that the lens is not obstructed and that it is aimed at the horizon.
Tip:
For specific recommendations on wearing VISTA XLT, review the
WatchGuard Online Training Course for VISTA XLT. For access to the training
course, contact WatchGuard Customer Service.
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518
19
