Using the VISTA Body Camera
Undocking the camera from the USB Base
Evidence Library software commands and requests are only applied when the camera is
undocked from a USB Base. When you undock the camera, it processes the commands and
requests in the following order, as applicable:
1. Performs a state capture.
The display reads
STATE CAPTURE
.
2. Updates the configuration.
The display reads
CONFIG
. The configuration update alert sounds when the update is
finished.
3. Generates an RATF event.
The display reads
CREATING RATF
.
Note:
After the RATF event has been generated, the camera starts the
event categorization sequence for the RATF event if it is configured to
require event categorization. For instructions how to categorize an
event, see Categorizing a Recorded Event on
4. Unprotects the recorded events confirmed as imported.
This makes the storage space available to be reused as needed.
5. Stages the firmware upgrade to perform the next time the camera is docked.
Once all the commands and requests are processed, VISTA is ready for normal operation.
For more information about the USB Base, see
32
VISTA Body Camera
WGD00120 Revision
ReviewDraft_111518
