![background image](http://html.mh-extra.com/html/watchguard/firebox-x10e/firebox-x10e_user-manual_874136056.webp)
Chapter 3: Getting Started
34
WatchGuard Firebox System
When you add a secondary network, you map an IP
address from the secondary network to the IP address of
the Firebox interface. This is known as creating (or adding)
an IP alias to the network interface. This IP alias becomes
the default gateway for all the machines on the secondary
network. The presence of a secondary network also tells
the Firebox that another network resides on the Firebox
interface wire.
You add secondary networks in the following two ways:
•
The QuickSetup Wizard, which is part of the
installation process, asks you to select the checkbox if
you have “an additional private network behind the
Firebox” when you are entering the IP addresses for
the Firebox interfaces. The additional private network
you specify becomes the secondary network on the
trusted interface. For more information on the
QuickSetup Wizard, see “Running the QuickSetup
Wizard” on page 40.
Summary of Contents for Firebox X10E
