![background image](http://html.mh-extra.com/html/watchguard/firebox-x10e/firebox-x10e_user-manual_874136131.webp)
Configuring a Service for Incoming Static NAT
User Guide
109
vice. See the following FAQ before configuring static NAT
for a service:
https://support.watchguard.com/advancedfaqs/nat_outin.asp
1
Double-click the service icon in the Services Arena.
The service’s Properties dialog box appears displaying the
Incoming tab.
2
Use the
Incoming
drop-down list to select
Enabled
and Allowed
.
To use static NAT, the service must allow incoming traffic.
3
Under the
To
list, click
Add
.
The Add Address dialog box appears.
4
Click
NAT
.
The Add Static NAT dialog box appears, as shown in the
following figure.
5
Use the
External IP Address
drop-down list to select
the “public” address to be used for this service.
If the public address does not appear in the drop-down list, click
Edit to open the Add External IP dialog box and add the public
address.
6
Enter the internal IP address.
The internal IP address is the final destination on the Trusted
network.
7
If appropriate, select the checkbox marked
Set internal
port to different port than service
.
This feature is rarely required. It enables you to redirect packets
not only to a specific internal host but also to an alternative port.
If you select the checkbox, enter the alternative port number in
the Internal Port field.
8
Click
OK
to close the
Add Static NAT
dialog box.
The static NAT route appears in the Members and Addresses list.
9
Click
OK
to close the
Add Address
dialog box. Click
OK
to close the services’s
Properties
dialog box.
Summary of Contents for Firebox X10E
