![background image](http://html.mh-extra.com/html/watchguard/firebox-x10e/firebox-x10e_user-manual_874136087.webp)
Entering WINS and DNS Server Addresses
User Guide
65
N
OTE
Check secondary network addresses carefully. Policy
Manager does not verify that you have entered the correct
address. WatchGuard strongly recommends that you do not
enter a subnet on one interface that is part of a larger
network on another interface.
Entering WINS and DNS Server Addresses
Several advanced features of the Firebox, such as DHCP
and Remote User VPN, rely on shared Windows Internet
Name Server (WINS) and Domain Name System (DNS)
server addresses. These servers must be accessible from the
Firebox trusted interface.
Make sure you use only an internal DNS server for DHCP
and Remote User VPN. Do not use external DNS servers.
From Policy Manager:
1
Select
Network
=>
Configuration
. Click the
WINS/
DNS
tab.
The WINS/DNS tab appears, as shown in the following figure.
2
Enter primary and secondary addresses for the WINS
and DNS servers. Enter a domain name for the DNS
server.
Summary of Contents for Firebox X10E
