Using Aliases
User Guide
163
A host alias takes precedence over a Windows NT or
RADIUS group with the same name.
Adding an alias
From Policy Manager:
1
Select
Setup
=>
Aliases
.
The Aliases dialog box appears, as shown in the following figure.
2
Click
Add
.
3
In the
Host Alias Name
text box, enter the name used
to identify the alias when configuring services and
authentication.
4
Click
Add
.
The Add Address dialog box appears, as shown in the following
figure.
Group
Function
firebox
Addresses assigned to the three Firebox interfaces
and any related networks or device aliases
trusted
Any host or network routed through the physical
trusted interface
optional
Any host or network routed through the physical
optional interface
external
Any host or network routed through the physical
external interface; in most cases, the Internet
dvcp_nets
Any network behind the DVCP client
dvcp_local_nets
Any network behind the DVCP server
Summary of Contents for Firebox X10E
