U.S. SALES:
1.800.734.9905
INTERNATIONAL SALES:
+1.206.613.0895
ADDRESS:
505 Fifth Avenue South, Suite 500
Seattle, WA 98104-3892
WEB:
www.watchguard.com
©2006 WatchGuard Technologies, Inc. All rights reserved. WatchGuard, Firebox, LiveSecurity and the WatchGuard logo are either trademarks or registered trademarks of WatchGuard Technologies, Inc.
in the United States and/or other countries. All other trademarks are the properties of their respective owners. P.N. 352-2545-002 WGPE66377_092006
TECHNICAL SUPPORT
+1.206.613.0456
(all other countries)
www.watchguard.com/support
1.877.232.3531
(U.S. and Canada)
Firebox® X10e, X20e, X55e
Firebox® X10e-W, X20e-W, X55e-W
5
Run the Quick Setup Wizard
Your Firebox X Edge is protecting your network!
Now, you can create firewall rules and user accounts to enforce the security
requirements of your company. You also can:
■
See network statistics
■
Monitor log messages
■
Set custom firewall rules to allow or deny connections
■
Configure Virtual Private Networks (VPNs)
■
Manage network traffic with Quality of Service (QoS)
■
Use LDAP or Active Directory for authentication
Important!
Before you start the Quick Setup Wizard, make sure:
■
You have registered your Firebox X Edge with LiveSecurity.
■
You have a copy of your feature key.
■
Your computer is set to connect using DHCP.
1
.
Start your web browser.
2
.
Type
https://192.168.111.1
in the address bar of your browser and press
Enter.
3
.
Use the Quick Setup Wizard to configure your Firebox X Edge.
4.
Use the user name and password you set in the wizard to log in to your Edge.
5
.
To install the most current Edge software, run the executable you saved in section 1, step 5.
