20
WatchBot Home Security Camera - User Guide
Important Note about Wi-Fi networks!
At the moment, the WatchBot camera
only supports wireless networks secured with WEP encryption
. WPA/WPA2 encryption
is currently not supported. Please set ‘Encryption’ to WEP and ensure your network
router settings are set the same.
Click Submit to save the settings. The camera will reboot.
Unplug the network cable
Once the settings above have been saved and the camera has rebooted, unplug the network
cable from the camera, then unplug the power cable.
Re-attach the power cable and wait approximately 30 seconds to 1 minute for the device to
appear on the wireless LAN. (You can test this by attempting to access your camera interface
via Internet Explorer).
Your WatchBot camera is now functioning wirelessly and will only need it’s power cable
attached in order to operate.
Summary of Contents for Home Security Camera
