fig 7.2.6 a
fig 7.2.6 b
INTRODUCTION
© WASP S.r.l.
7
49
Ordinary and extraordinary maintanance
7
7.2.1. Belts
Tension monitoring
Turn off the machine and open the door.
Manually check that the tension between all the belts results uniform.
If it is possible to perceive an important difference in tension on one of the belts,
contact the Manufacturer addressing [email protected]
Fig. 7.3.1- Ball joints lubrication
Fig. 7.2.1- Monitoring the tension of the belts
7.2.2. Ball joints
Lubrication
Turn off the machine and open the door.
Check the mobility / stiffness of the arm joints.
Apply machine tool lubricant and gently move them manually. Wipe off excess oil
This will preserve the optimal functioning of the mechanics.
Summary of Contents for 4070 HDP
