Wascomat Selecta S28/125, Operating & Maintenance Manual

Page: 24 / 76

17
1929
1859
.
• Press START.
A clock dial will now appear in the display panel
and two figures will show remaining wash time
in minutes.
A colon will flash for five minutes. The machine
can be restarted during this time with no loss of
detergent. This allows you to rectify a possible
mistake (eg: wrong program or wrongly sorted
wash). (See RESTARTING)
Boxes around arrows will light up as each suc-
cessive wash stage or supply signal is passed
or used.
After the machine has started you can check
the wash temperature by pushing a program
button. A thermometer will now light up showing
the temperature in
°
C, with digits.
If the machine is not started and no buttons are
pushed the program choice will disappear after
five minutes and only the arrow next to the key
symbol will remain lit (resting position).
Pause
If for any reason a pause is desired during the
wash then the START button should be briefly
pressed. The machine will now stop, the arrow
showing the current programstep will start to flash
and the water outlet will remain closed.
The program may be restarted by a brief push on
the START button.
Fig.
31
31
32
Fig.
31
Fig.
32
Operating Instructions