20
4944
Start-up and safety checklist
Before initial start-up of an EX 30 S/EX 50 S
washer, the following safety checks must be
performed:
•
Make sure that all electrical and plumbing
connections have been made in accordance
with applicable local codes.
•
Use only flexible water fill and drain hoses of
the proper length to avoid sags and kinks.
•
Make sure the machine is properly grounded
(electrically).
Before the machine is operated, the door safety
interlock must be checked for proper operation
as follows:
•
When washer loading door is open, the
machine must not start. Verify this by attemp-
ting to start washer with door open.
•
When washer is in operation, the loading door
is locked and cannot be opened. Verify this by
attempting to open the loading door when the
machine is operating. If necessary, consult
this manual for proper operation of the door
safety interlock or call a qualified serviceman.
If the machine starts with the door open or
the door can be opened after machine is
running, the machine must immediately be
placed OUT OF ORDER and the door
interlock system must be repaired or
replaced. Disconnect electrical power from
the machine until the necessay repairs are
made.
Door safety interlock must be checked
daily in accordance with above procedure.
Before servicing Wascomat equipment,
disconnect electrical power.
Fig.
20
Fig.
21
20
Installation
21
4945
1
2
3
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
9
0
